News

This Is What Happens When You Run Water Through a 24hz Sine Wave.

This is how you can replicate this experiment at home.

What you will need:

  • A powered speaker
  • Water source
  • Soft rubber hose
  • Tone generating software
  • 24 fps camera
  • Tape.

Run the rubber hose down past the speaker so that the hose touches the speaker. Leave about 1 or 2 inches of the hose hanging past the bottom of the speaker. Secure the hose to the speaker with tape or whatever works best for you. The goal is to make sure the hose is touching the actual speaker so that when the speaker produces sound (vibrates) it will vibrate the hose.

Set up your camera and switch it to 24 fps. The higher the shutter speed the better the results. But also keep in the mind that the higher your shutter speed, the more light you need. Run an audio cable from your computer to the speaker. Set your tone generating software to 24hz and hit play.

Turn on the water. Now look through the camera and watch the magic begin. If you want the water to look like it’s moving backward set the frequency to 23hz. If you want to look like it’s moving forward in slow motion set it to 25hz.

Source:

brusspup

Do you like our independent & investigative news? Then please check these two settings on Facebook to guarantee you don't miss our posts:

TrueActivist

Popular On True Activist

More On True Activist

To Top